Skip to content
Sloje

Care for your board

Wash by hand, let both faces dry and renew the finish when the wood needs it.

Download the printable care guide (PDF, A4)

A small jar of board-care mixture and a folded cotton cloth

After cooking

Wash the board by hand with water and a little mild washing-up liquid. Do not soak it or put it in a dishwasher.

Let both faces dry

Wipe the board after washing, then stand it on its edge with air reaching both faces. Avoid leaving a wet face against the worktop.

When to renew the finish

Check the surface about once a month. If the wood looks dry or dull, renew the finish. How often it needs this depends on use and conditions.

A thin coat is enough

Use the finish that comes with your board or another food-safe finish made for wooden cutting boards. Apply a thin coat to clean, dry wood and follow the product’s instructions.

The jar and cloth

Every board comes with a cotton cloth and a small jar of cutting board finish, including boards ordered unfinished.

Materials and unfinished boards

The boards are made from oak and bonded with Titebond III Ultimate. An unfinished board leaves the workshop as bare oak. If you choose this option, ask me about preparing it before first use.

More about the adhesive and caring for wooden boards.

Titebond glue FAQJohn Boos care FAQ